JC-LGL / LIGHTING JOURNAL
What Lighting Does an Indoor Riding Arena Need?
For an ordinary indoor teaching arena, start the lighting discussion at IFCE’s 300 lux (about 28 fc) indoor-school reference, then agree the project target. This French guidance is not a universal U.S. requirement. Choose high bays that provide useful light through darker areas, comfortable riding views and steady output at the intended dimming settings. Compare beam spread and mounting positions together. Round and linear fixtures can both be candidates; match the exact model to dust, moisture and maintenance access. More wattage alone will not remove a shadow caused by an obstruction.
The best high bay lights for an indoor riding arena provide enough light for the riding activity, distribute it across the ring and keep bright sources from dominating the riding view. Choose the light level and distribution before settling on wattage or fixture shape. Horses, riders and instructors need to see the footing, boundaries and obstacles as they move through the space.
What Should Good Arena Lighting Help Horses and Riders See?
A horse’s view differs from the rider’s. Horses have a wide field of vision, with a smaller overlapping field used for depth perception. They can see in dim conditions, but rapid transitions between bright and dark locations can be difficult. UC Davis explains these features of equine vision, including the transition from sunlight into an indoor arena.
That matters at an entrance, across patches of sunlight and near darker corners. The useful aim is a readable riding surface with manageable changes in brightness. A horse and rider moving toward a jump or turning along the boards need to see what is ahead, rather than repeatedly pass from a bright pool into a dark gap.
Evaluate the view along normal riding directions. Light on the ground helps reveal the route and footing, while light reaching the sides of obstacles helps make their shape visible. Instructors also need to follow the horse and rider across the ring. A view from the gate alone cannot represent all of those positions.
Daylight changes the result. A row of windows can make one side bright during the day, while an installation that looks adequate then may leave the same area dark in the evening. Look at the arena under electric light and consider the entrance transition during normal daytime use as well.
For a few replacements, use the following comparisons to understand what needs improving at the existing positions. For a new arena or a substantial redesign, use them to agree targets with the lighting professional. The amount of planning should follow the scale of the change.
How Bright Should an Indoor Riding Arena Be?
The useful brightness measure is illuminance: how much light reaches a surface. In the United States, it is commonly expressed in foot-candles (fc); many equestrian references use lux. One foot-candle is about 10.76 lux. Lumens describe the fixture’s total output, so a high lumen figure does not tell you the illuminance across an installed arena.
Riding activity changes the target. The French Horse and Riding Institute, IFCE, publishes average illumination references for equestrian working areas:
| Use in the IFCE guidance | Average reference |
|---|---|
| Indoor training: stated acceptable level | 200 lux (about 19 fc) |
| Indoor school: general recommendation | 300 lux (about 28 fc) |
| Competition, including spectator comfort | 500 lux (about 46 fc) |
For an ordinary teaching arena, start the discussion with IFCE’s indoor-school recommendation of 300 lux, about 28 fc. Its 200 lux figure is a lower acceptable training reference. It is not a reason to reduce every teaching arena to that level. Agree the project target for the actual riding activity, alongside the darker-area performance described below.
These French references give a starting scale, not a universal U.S. requirement. A competition venue or a project governed by a particular specification needs the applicable event and project targets. Jumping, judging and recording video can add demands beyond ordinary flatwork training.
Also distinguish the output of a new, clean installation from the light level it is intended to maintain as fixtures age and dirt accumulates. A proposal showing only new-installation brightness may not describe its later performance. Have the calculation identify the riding-surface measurement plane and whether its results are initial or maintained.
For example, if a proposal promises an average of 20 fc, that average alone does not tell you what happens in a corner. The lowest readings and the differences between areas still need attention.
Why Do Bright Arenas Still Have Dark Corners and Harsh Shadows?
An average combines brighter and darker readings. Strong light beneath a few fixtures can raise that figure while leaving the edges poorly served. Uniformity describes how evenly the light is distributed; one common measure divides the minimum reading by the average. With that measure, a value closer to 1 indicates less difference between the darkest reading and the average.

In the illustration, both sets average 20 fc. One has a minimum of 4 fc, giving 4 ÷ 20 = 0.20. The other has a minimum of 14 fc, giving 14 ÷ 20 = 0.70. The second set has a smaller dark-area deficit even though the average has not increased. These ratios explain the comparison; they are not pass/fail targets for every arena.
Read the ratio label on a proposal. Minimum-to-average, average-to-minimum and maximum-to-minimum are different comparisons. A bare “3:1” is incomplete without saying which readings are being compared.
Separate Dark Areas From Cast Shadows
A dark strip along the boards may mean too little light reaches that area. A cast shadow happens when a horse, rider, obstacle or roof member blocks a particular path of light. An arena can have both problems, and increasing power at the same position may leave the obstruction unchanged.
For example, lighting a jump mainly from one direction can leave a pronounced shadow on its far side. Useful light arriving from another direction can reduce that contrast. The arrangement should still let the obstacle’s shape remain visible and avoid putting an intense source in the approaching rider’s view.
When assessing a new layout, look at the darker calculation points and their locations, especially the perimeter, gates and riding lines. When assessing an existing arena, look with normal obstacles in place. A clear, empty ring can conceal the shadows that appear during training.
How Do You Reduce Glare and Flicker in a Riding Arena?
Reduce Glare in Normal Riding Views
Glare is a visual problem caused by a bright source or bright contrast in the field of view. A bright LED face against a dark roof can draw attention away from the footing or an approaching obstacle. More light on the ground can coexist with an uncomfortable view toward the fixtures.
Position, shielding and the fixture’s optical design all matter. Compare the view along the long side, through a corner and on an approach to a jump. Where a source is distracting, consider a different permitted position or a manufacturer-approved optic or shield. Simply tilting a fixture can move the problem into another riding direction.
A larger emitting surface may distribute brightness differently from a compact one, but a linear body does not automatically produce less glare than a round high bay. The actual emitting face, light distribution, height and viewing angle determine that comparison.
Check the Driver and Dimming Behavior for Flicker
Flicker concerns changes in light output over time. LEDs respond quickly to their electrical supply, so the driver and control can affect whether the light remains steady. DOE’s flicker research explains that performance can change with driver loading and dimming level.
For purchasing, ask for flicker test information for the exact fixture and driver, including the dimmed settings you intend to use. A dimmable label or a comfortable glance at full output does not establish performance at lower settings. A phone video may reveal banding, but it cannot by itself certify the fixture’s flicker performance.
A report may show PstLM for visible flicker and SVM for stroboscopic effects, where motion can appear broken or altered. NIST researchers describe these different metrics through IEA 4E. Lower values indicate less predicted visibility of the particular effect being measured. Compare PstLM with PstLM and SVM with SVM, using the same output and control conditions.
For example, two hypothetical reports showing SVM 0.3 and 0.8 at the same operating setting favor the 0.3 result on that measure. It is not a complete lighting-quality verdict. Research published by Canada’s National Research Council examines how SVM relates to human detection of the effect. Have the seller identify the guideline being claimed and include results at the intended dimmed setting.
Use that evidence to compare lighting quality for the people using the arena. A human flicker metric should not be presented as a validated threshold for horses, and an unsupported “horse-safe” claim should not settle the purchase.
How Should You Choose Fixture Positions, Height and Beam Spread?
Once the lighting needs are clear, consider how the available roof positions can serve them. A fixture’s beam angle describes the spread of its main beam. At equal height, a wider angle reaches farther sideways; the detailed distribution and output determine how much useful light reaches each area.

A center row that leaves the long sides dark may benefit from broader distribution, different row positions or additional light from another direction. Widely separated fixtures can leave gaps along the length. Those are distribution problems to resolve alongside total output.
Mounting height changes the same comparison. Raising a fixture spreads its light over a larger area and reduces the illuminance directly below for the same output and distribution. A lower position can provide more concentrated light but may bring the source into a more intrusive view. Neither the widest beam nor the lowest mounting height is automatically best.
There is no universal row count or spacing for all indoor arenas. Roof framing, ring width, existing positions and the selected optics affect the arrangement. For fixture quantities, relate those positions to the light levels they need to deliver.
Scale the Planning to the Replacement
For a few replacements in an otherwise useful installation, start with the existing height and the specific problem to improve. If old specifications are missing, installation photos, a readable model label and the locations of dark areas can support the discussion with the installer. A representative replacement, where practical, can help check the change from normal riding views.
For a new arena, substantially moved lights or a change in use, a photometric calculation is useful. This is a prediction of light across the modeled space using the exact fixtures, heights and positions. Have the lighting professional show the agreed average, minimum and uniformity results on the riding surface. A drawing of fixture dots alone does not answer those questions.
Which High Bay Fixtures Suit the Arena and Its Maintenance Conditions?
Compare products against the requirements established above. Two JC-LGL options illustrate why output and beam spread belong in the same comparison:
| JC-LGL example | Listed full output and beam |
|---|---|
| 150W black UFO HB high bay | 22,500 lumens 120° |
| 130W selectable linear high bay | 19,500 lumens 90° |
Where center-mounted lights leave the sides dark, the UFO example’s broader stated beam is a reason to include it in a distribution comparison. The linear fixture is a candidate where its narrower pattern can be arranged to reach the riding area and overlap between rows. Its selectable output allows a setting to be chosen for the installed height. For either candidate, compare the resulting average and minimum light levels at the intended positions; obtain separate evidence for glare and flicker performance.
Color temperature describes whether the light looks warmer or cooler; it is separate from light quantity. Keep color appearance reasonably consistent when replacing part of an installation. If judging or video work requires particular color rendering, include that requirement when comparing models rather than treating a color-temperature label as proof.
Match Protection to Exposure at the Fixture
Footing dust can collect on overhead equipment, and moisture depends on the building and watering system. Penn State Extension’s arena footing guidance describes dust deposition and watering methods, including overhead systems. Floor-level watering and spray reaching a roof-mounted light create different conditions for that light.
Both JC-LGL examples list IP65 enclosures. In SGS’s explanation of the IP code, the 6 indicates dust-tight protection and the 5 protection against water jets under the defined test. That enclosure information is relevant to footing dust and water exposure.
The linear model also states suitability for damp locations. Select the installation rating for the actual exposure. Condensation calls for damp-location suitability, while direct water exposure needs a fixture permitted for those wet conditions. Follow the exact product’s permitted location and mounting instructions alongside its IP rating.
Keep Light Available Through the Riding Session
Manual switching or a compatible schedule is a straightforward starting point for the main ring. A motion timer that dims or switches off during a quiet pause can interrupt an occupied session. Any dimming should use the documented driver and control combination, with the intended lower settings included in the lighting-quality assessment.
Include maintenance access in the choice of mounting positions. If cleaning or replacement needs a lift, consider how it enters the ring and when the surface can be cleared for the work. Have the installer confirm support, connections and clearance from doors and equipment.
Before committing to a full replacement, connect the product choice back to the original need: enough maintained light for the activity, useful light through the darker areas, comfortable riding views and steady operation. Those are the results the chosen fixtures and arrangement need to deliver.
Sources
- UC Davis: equine vision and performance
- IFCE: lighting equestrian working areas
- U.S. Department of Energy: flicker research
- Penn State Extension: arena footing and dust management
- IEA 4E / NIST: flicker measurement metrics
- National Research Council Canada: stroboscopic effect visibility experiment
- SGS: the IP code and enclosure protection
Related Articles
Indoor Arena Lighting FAQ
Can the same high bays serve an uncovered outdoor arena?
Only if the exact fixture and mounting arrangement are approved for that outdoor exposure. An open arena also needs a different placement and aiming assessment, including spill light beyond the ring. Suitability for an indoor riding arena does not establish that outdoor use.
Comments 0
Be the first to leave a comment.