What Is an LED Wall Pack Light?
An LED wall pack light is a rugged, wall-mounted outdoor luminaire designed to cast bright, even light across the area in front of a building. The "pack" refers to the compact, all-in-one housing that contains the LED chips, driver, optics, and (on most modern models) a photocell sensor.
Wall packs are the workhorse of commercial exterior lighting because they:
- Mount directly to a wall or junction box at 8–20 ft, with no pole required
- Provide wide-angle perimeter coverage for security and safety
- Run unattended thanks to dusk-to-dawn automation
- Last 50,000+ hours with virtually no maintenance
Traditional wall packs used metal halide (MH) or high-pressure sodium (HPS) lamps that burned 250–1000W, ran hot, and needed bulb replacements every 1–3 years. LED wall packs deliver the same brightness (or more) at a fraction of the wattage, with no bulbs to change.
JC-LGL 60W/120W LED Wall Pack: Specifications at a Glance
| Specification | 60W Model | 120W Model |
|---|---|---|
| Luminous flux | 7,800 lumens | 15,600 lumens |
| Efficacy | 130 lm/W | 130 lm/W |
| Color temperature | 5000K daylight | 5000K daylight |
| Beam angle | 120° | 120° |
| Input voltage | AC 100–277V | AC 100–277V |
| Dimming | 0–10V dimmable | 0–10V dimmable |
| Photocell | Built-in dusk-to-dawn (disableable) | Built-in dusk-to-dawn (disableable) |
| Waterproof rating | IP65 | IP65 |
| Housing | Die-cast aluminum, impact-resistant lens | Die-cast aluminum, impact-resistant lens |
| HID equivalent | Replaces 250–400W MH/HPS/HID | Replaces 600–800W+ MH/HPS/HID |
| Operating temp | −40°C to 40°C (−40°F to 104°F) | −40°C to 40°C (−40°F to 104°F) |
| Rated lifespan | 50,000+ hours | 50,000+ hours |
| Warranty | 5 years | 5 years |
Both wattages share the same fixture platform, so you can standardize one product across an entire property and simply spec the output to the area.
How Many Lumens Do You Need?
The right brightness depends on mounting height and the size of the area you're lighting. As a general rule for commercial exterior lighting:
| Application | Typical mounting height | Recommended output |
|---|---|---|
| Doorways, single entrances | 8–10 ft | 5,000–8,000 lm (60W) |
| Building perimeters, walkways | 10–15 ft | 7,800–12,000 lm (60–120W) |
| Loading docks, large facades | 12–20 ft | 12,000–16,000 lm (120W) |
| Wide yards, small lots | 15–20 ft | 15,600 lm+ (120W, spaced) |
A simple planning benchmark: aim for 1–5 footcandles (about 10–50 lumens per square foot) for general security areas, and toward the higher end for loading docks and active work zones. The JC-LGL 60W covers most entrances and perimeters; the 120W is built for docks, large walls, and yard lighting.
If you're unsure, choose the 120W and use its 0–10V dimming to dial brightness down. It's easier to reduce output than to add fixtures later.
Replacing Metal Halide & HPS: Wattage Conversion Chart
Switching from legacy HID to LED is the single fastest way to cut a property's exterior lighting bill. Because LEDs are directional and far more efficient, a much lower LED wattage produces equal or greater usable light.
| Old HID/MH/HPS fixture | Equivalent LED wall pack | Energy reduction |
|---|---|---|
| 150–250W metal halide | 60W LED (7,800 lm) | ~70–76% |
| 250–400W metal halide | 60–120W LED | ~70–75% |
| 600–800W MH/HPS | 120W LED (15,600 lm) | ~80–85% |
| 1000–1200W HID | 120W LED | ~85%+ |
LEDs also avoid the "lumen depreciation" of HID lamps, which can lose 30–50% of their brightness before they ever burn out. Your LED output stays consistent for the life of the fixture.
How Much Will You Actually Save?
Here's a realistic single-fixture example, replacing a 600W HID system with the JC-LGL 120W wall pack, running on a dusk-to-dawn schedule (~12 hours/night) at an electricity rate of $0.15/kWh:
| 600W HID system | JC-LGL 120W LED | Savings | |
|---|---|---|---|
| Annual energy use | ~2,628 kWh | ~526 kWh | 2,102 kWh |
| Annual energy cost | ~$394 | ~$79 | ~$315/fixture/year |
| Bulb/maintenance | Every 1–3 yrs | None for 50,000 hrs | Labor + parts |
Multiply that across 10, 20, or 50 fixtures and the payback period for an LED retrofit is typically well under two years — before factoring in utility rebates. (Always confirm your local rate and run hours; many US/Canada utilities offer rebates for qualifying commercial LED fixtures.)
Where Commercial LED Wall Packs Are Used
The JC-LGL wall pack is built for demanding commercial and industrial environments, including:
- Loading docks and bays — bright, glare-controlled light for safe nighttime loading
- Parking lots and structures — perimeter and wall-mounted coverage
- Building exteriors and entrances — security, wayfinding, and curb appeal
- Warehouses and factories — exterior walls, side doors, and yards
- Retail and office complexes — perimeter security and parking
- Gas stations, hotels, and storage facilities — 24/7 reliable illumination
For a fully lit property, wall packs usually pair with other fixtures. JC-LGL offers a complete commercial range — high bay lights for warehouse interiors, parking lot lights for open lots, construction work lights for job sites, and loading dock lights for docks and ramps — so you can source an entire system from one supplier.
How Dusk-to-Dawn Photocells Work
A dusk-to-dawn photocell is a small light-sensing component built into the fixture. It measures ambient light and:
- Turns the fixture ON automatically at sunset / nightfall
- Turns it OFF automatically at sunrise / daylight
This means no timers to reset, no switches to flip, and no wasted daytime energy. On the JC-LGL wall pack, the photocell is pre-installed and shipped with a plug in place — leave the plug in to use the sensor, or remove it if you'd rather control the light from a breaker or external control system. The result is hands-off, year-round security lighting that only runs when it's actually dark.
Installation: 3 Mounting Methods, One-Person Friendly
The JC-LGL wall pack is designed for fast, single-installer setup using a removable mounting plate that adapts to most standard junction boxes (J-BOX surface mount). The basic process:
- Mount the back plate to the wall or junction box using the pre-marked holes.
- Connect the wiring through the waterproof port (line, neutral, ground; optional 0–10V dimming leads).
- Re-attach the lamp housing to its hinges and seal.
The fixture supports three mounting configurations to fit different wall surfaces and electrical setups. A parts kit with plugs and screws is included; you supply a standard drill. Electrical work should always follow local code — hire a licensed electrician where required.
What to Look For When Comparing Commercial Wall Pack Lights
Not all wall packs are equal. When you compare brands, weigh these factors:
- Lumen output & efficacy (lm/W). Higher lm/W means more light per watt. The JC-LGL runs at 130 lm/W.
- Color temperature. 5000K daylight is the standard for security and visibility.
- Ingress protection (IP rating). IP65 is the minimum for reliable wet-location outdoor use.
- Dimming. 0–10V dimming lets you fine-tune output and qualify for more controls-based rebates.
- Voltage range. A wide AC 100–277V range fits both residential and commercial circuits.
- Warranty. A 5-year (or longer) warranty signals confidence in build quality.
- Certifications. For US/Canada commercial projects, look for UL/ETL safety listing and DLC listing if you intend to claim utility rebates.
- Operating temperature range. Critical in northern climates — the JC-LGL is rated to −40°F.
Feature comparison
The table below compares the JC-LGL 120W wall pack against typical specs publicly listed by two well-known US lighting brands, Hyperlite and Sunco. Specifications change over time, so verify current details on each manufacturer's site before purchasing.
| Feature | JC-LGL 120W | Hyperlite (120W class) | Sunco (Wall Pack range) |
|---|---|---|---|
| Lumen output | 15,600 lm | Up to 18,000 lm | ~8,100–19,300 lm (model-dependent) |
| Efficacy | 130 lm/W | Up to 150 lm/W | Varies by model |
| Color temperature | 5000K | 5000K | Selectable 3000K/4000K/5000K on many models |
| Dusk-to-dawn photocell | Built-in (standard) | Available | Available / built-in by model |
| Dimming | 0–10V | Model-dependent | 0–10V / 1–10V by model |
| Voltage | AC 100–277V | AC 120–277V | AC 120–277V |
| Waterproof | IP65 | IP65 | IP65 |
| Warranty | 5 years | 5 years (terms vary) | Up to 7 years |
| Wattage flexibility | 60W & 120W on one platform | Fixed per model | Selectable wattage on many models |
Where JC-LGL stands out: a single, easy-to-spec 60W/120W platform; standard built-in dusk-to-dawn; 0–10V dimming included; a wide −40°F operating range; and competitive pricing with free US/Canada shipping and a 5-year warranty. Buyers who need selectable CCT, a glass lens, or DLC-listed fixtures for rebate programs should confirm those specific options before ordering.
Build a Complete Commercial Lighting System
A wall pack is one piece of a well-lit property. To cover every area, JC-LGL's commercial and industrial range includes:
- High bay lights — for warehouse, factory, and high-ceiling interiors
- Parking lot / shoebox lights — for open lots and roadways
- Construction & work lights — portable, high-output job-site illumination
- Loading dock lights — focused light for docks, ramps, and bays
- Canopy lights — for gas stations, carports, and covered entries
Sourcing your full system from one brand simplifies warranty, color matching (consistent 5000K), and reordering. Explore the full catalog in the JC-LGL collection.
Frequently Asked Questions
What does a 120W LED wall pack replace? A 120W LED wall pack producing 15,600 lumens typically replaces a 600–800W (or higher) metal halide, HPS, or HID fixture while using roughly 80–85% less energy.
How many lumens is a 60W wall pack light? The JC-LGL 60W wall pack produces 7,800 lumens of 5000K daylight, suitable for entrances, walkways, and building perimeters.
Are LED wall pack lights waterproof? Yes. The JC-LGL wall pack carries an IP65 rating, meaning it is dust-tight and protected against water jets — built for rain, snow, and humid conditions when properly installed.
Do these wall packs turn on automatically at night? Yes. A built-in dusk-to-dawn photocell turns the fixture on at nightfall and off at sunrise automatically. The sensor can be disabled if you prefer breaker or external control.
What color temperature is best for security lighting? 5000K (daylight white) is the industry standard for security and commercial applications because it provides high visibility and accurate color rendering at night.
Can I dim an LED wall pack? Yes — the JC-LGL wall pack supports 0–10V dimming, so you can reduce output to save energy or meet light-trespass requirements.
How long do LED wall pack lights last? The JC-LGL fixture is rated for 50,000+ hours of service life and backed by a 5-year warranty. At 12 hours per night, that's well over a decade of operation.
How high should I mount a wall pack? Most commercial wall packs are mounted between 8 and 20 feet. Use the 60W for lower mounting at entrances and the 120W for higher mounting on docks and large facades.
Will it work in cold climates? Yes. The JC-LGL wall pack operates from −40°F to 104°F (−40°C to 40°C), making it suitable for cold northern US and Canadian climates.
Does JC-LGL ship to the US and Canada? Yes. JC-LGL ships to US and Canadian addresses, typically within 2–7 days, with free shipping and a 5-year warranty.
For commercial and industrial properties that need dependable, low-maintenance exterior security lighting, the JC-LGL 60W/120W LED wall pack is a strong, value-focused choice: 7,800–15,600 lumens of 5000K daylight, IP65 weatherproofing, built-in dusk-to-dawn automation, 0–10V dimming, a wide −40°F operating range, and a 5-year warranty — all on a single fixture platform that replaces 600–1200W of legacy HID lighting.
Ready to upgrade? View the JC-LGL 60W/120W LED Wall Pack Light and pair it with high bay, parking lot, and loading dock fixtures for a complete commercial lighting system.