Choose the location
Consider a gate, access road or yard where extending electrical service is inconvenient. Keep the panel out of shade.
Sponsored outdoor lighting guide80W / 120W integrated solar lights
Off-grid outdoor lighting
Light the way.
Powered by the sun.
Light roads and yards without new mains wiring. Compare models. Plan the full order.
No grid connectionLiFePO4 battery5-year limited warranty
Image unavailable. View official product.
Two real outputs13,600 / 21,000 lm published
1 & 10 packsPlan single points or a complete rollout
Sun → battery → lightSite sunlight and operating mode matter
The value is in the complete project
When the next light
needs a new power run.
A fixture price is only one part of a wired-lighting project. Solar lets you consider locations away from existing power, without a mains feed to the light.
Bring the energy with it
The integrated solar panel charges a LiFePO4 battery. Sunlight, season and the selected brightness mode determine daily energy balance.
Plan more than one point
Price the full fixture count using available packs and volume tiers. Match spacing to a lighting layout—not wattage alone.
Compare installed scope, not just the sticker price.
Wired option: fixtures + electrical supply run + site works + installation + energy and maintenance.
Solar option: fixtures + poles / foundations + mounting and installation + maintenance.
Get site-specific costs for both. This page does not assign a trenching saving or payback period. Pole and installation costs are not in the fixture estimate below.
01 / Choose your output
80W or 120W?
Compare the complete system.
Two fixed-output products, each with its own solar panel and battery. Higher output is useful when the lighting plan calls for it—not automatically longer runtime.
Buying for several locations?
Enter your full fixture count below. The estimate can combine 10-packs and singles for the same model.
No mains voltage selection is needed. Check solar exposure, pole fit and the supplied controls for your location.
Selected package
—
5000K · Type IIIP66 published
Continue to the product page to set package quantity, add to cart and check out.
02 / Price the complete fixture order
One light is a price.
A full rollout is a plan.
Enter the fixture count from your layout. Compare available same-model packages after eligible subtotal-tier savings.
Project estimate
Your fixture count.
Your package checklist.
Default: no extra fixtures. The estimate never mixes 80W and 120W, and does not automatically add anything to your cart.
Fixtures only. Excludes tax, shipping, poles, foundations, installation, maintenance and accessories not in the selected package.
Enter your required fixture count.
- Compatible pack subtotal
- —
- Estimated tier saving
- —
- Estimated fixture-order total
- —
- Average per supplied fixture
- —
Your complete package checklist
Open each package option and set the listed package quantity on the product page. Keep every line in the checklist.
More than 40 fixtures? Request a volume quote and confirm lead time on the product page.
Savings are an estimate under the displayed rules. Confirm eligible discounts and availability at checkout; no other offer is stacked.
See the subtotal discount rules
USD only. The highest reached threshold applies once to the whole eligible merchandise subtotal after multipack pricing, before tax and shipping.
Use the product selectors above for current package prices. Enable JavaScript for a complete package estimate.
03 / See the evidence
See the idea.
Check the hardware.
Official model imagery, a motion-control illustration and a sourced customer perspective. Explore the original product gallery and technical sheet.
Image unavailable. Open the official gallery below.
Brand application illustration, not a verified customer installation. Actual coverage depends on mounting, spacing and the site layout.
Image unavailable. Open the source gallery below.
Shared brand illustration depicts 30% / 100% / 30% operation. Confirm the supplied sensor, remote and actual settings; this is not a guaranteed program or runtime.
Start with the place you want to light
What does your site need?
Use the scene to build a useful brief. The lighting layout determines the model, mounting height, spacing and fixture count.
For an access road or gate, plan the points where vehicles enter and people walk. Type II distribution is listed for both models; check the layout, pole locations and unobstructed panel sunlight.
What changes the overnight result?
Available daylight, seasonal sun angle, shade, panel cleanliness, battery condition and the chosen brightness / sensor mode. The sheet's charging and backup figures do not establish a guaranteed full-output runtime for every site.
Side-by-side model comparison
A different output.
A different energy system.
Published values from the model-specific technical sheet and current product comparison. Swipe on small screens.
| Decision point | 80W | 120W |
|---|---|---|
| Published output | 13,600 lm* | 21,000 lm* |
| Solar panel | 18V / 95W monocrystalline | 36V / 145W monocrystalline |
| LiFePO4 battery | 12.8V / 51Ah | 25.6V / 47.6Ah |
| Color / distribution | 5000K / Type II | 5000K / Type II |
| Outdoor ratings | IP66 / IK08 published | IP66 / IK08 published |
| Current pack choices | 1 or 10 fixtures | 1 or 10 fixtures |
| How to choose | When the layout calls for the 13,600-lm model. | When the layout calls for more published output—not as a promise of longer runtime. |
| Site fit | Open-sun charging location, compatible 2⅜-inch O.D. vertical tenon and an appropriate lighting layout. Poles / foundations need their own plan. | |
*Some older product copy differs. This page uses the model-specific sheet and current comparison values; see product data notes below.
Selected model specifications
Keep the model
and the details together.
Key specifications and the matching technical-sheet page update with your selection.
80W integrated solar street light
| Selected SKU | See selected package |
|---|---|
| Nominal power / output | 80W / 13,600 lm published |
| Solar panel | 18V / 95W monocrystalline |
| Battery | 12.8V / 51Ah LiFePO4 |
| Nominal drawing size | 1010 × 520 mm footprint; 98 mm body; 317 mm bracket projection |
| CCT / distribution | 5000K fixed / Type II |
| Mounting | Fits a 2⅜-inch O.D. vertical tenon; Ø62 mm bore shown in the drawing. Confirm pole and structural fit. |
| Ingress / impact | IP66 / IK08 published |
| Controller / controls | Depower controller and microwave sensor listed; remote adjustment advertised. Confirm exact pack contents and mode settings. |
| Charge / backup figures | Sheet lists 6-hour charging and 2–3-day backup without a defined site or output profile. Actual runtime depends on solar conditions and operation; not guaranteed at full output. |
| Published conformity | FCC / CE / RoHS listed in the technical sheet |
| Warranty | Published 5-year limited warranty, subject to current terms |
Official H2104 sheet, model page 1. Reviewed October 8, 2026.
Product data notes
80W: the title says 18,000 lm, while the sheet and current comparison say 13,600 lm. Its older description also copies the 120W panel / battery values; this page uses the 80W sheet's 18V / 95W panel and 12.8V / 51Ah battery.
120W: some overview copy says 21,600 lm; the sheet and current comparison say 21,000 lm. Sensor inclusion is described both as supplied and optional, and older warranty copy says 3 years rather than the current 5-year specification. Confirm current pack contents, controls and warranty terms on the product page.
Why choose JC-LGL?
A useful system.
A clear purchasing plan.
Integrated hardware
Solar panel, battery and LED lighting in one product family. Two outputs let you match the fixture to the layout.
Whole-order visibility
Current package prices, a full purchasing checklist and estimated tier savings—not a single-unit price multiplied blindly.
Details you can inspect
Original product galleries, the model-specific technical sheet and a published 5-year limited warranty.
Common purchase questions
Choose with the project in mind.
Does the fixture price include poles and installation?
This estimate covers listed fixture packages only. Check the current package contents; budget poles, foundations, site work and installation separately.
Will the 120W model run longer than the 80W?
Not necessarily. The models have different panels, batteries and output. Runtime depends on harvested solar energy, the site and the operating program—not the wattage label alone.
How do I buy a mixed 10-pack + single-pack plan?
Open each line in your package checklist. On the product page, set the quantity of that package before adding it to the cart. Confirm the complete fixture count and eligible savings at checkout.
Light the place. Plan the order.
Choose the system
for your next lighting project.
Review the selected product or take your complete package checklist to the product page.
Compare models & project costCompare options →
JC-LGL LIGHTING STUDIO
3D Lighting Design Simulator
Plan indoor and outdoor LED lighting with JC-LGL fixtures across 24 scenes. Set dimensions in feet, drag up to 100 fixtures into place, and compare estimated illuminance and power.
Looking for 3D lighting simulation design? Please visit JC-LGL 3D Lighting Studio to view recommended lamps for different scenarios, lamp placement, 3D lighting effects, and plan for saving the scheme.