Types of JC-LGL LED Wall Pack Lights

Standard LED Wall Pack Light — 60W & 120W

The JC-LGL standard LED wall pack light uses a forward-throw beam at 5000K daylight white to broadly illuminate building facades, parking areas, and commercial perimeters. The 60W model outputs 7,800 lumens and replaces 400W HPS fixtures; the 120W model outputs 15,600 lumens and replaces 600W HPS/HID. Both run on 100–277V, include a built-in dusk-to-dawn photocell, support 0–10V dimming, and carry an IP65 wet-location rating. Die-cast aluminum housing with tempered glass protects against rain, dust, and impact. A 5-year replacement warranty is included. Ideal for: warehouses, school campuses, retail storefronts, office building exteriors, and commercial parking areas.

Full Cutoff LED Wall Pack — 40W / 60W / 100W

The JC-LGL full cutoff LED wall pack directs 100% of its output downward — zero upward light emission. At 140 lm/W and with a 0–90° adjustable bracket, you can fine-tune the beam angle on-site without repositioning the fixture. Rated IP66 (higher than the standard series) and compatible with 100–277V, it meets Dark Sky compliance requirements and avoids light trespass onto neighboring properties. Available in 40W, 60W, and 100W to cover a range of mounting heights and coverage areas. Ideal for: residential-adjacent commercial sites, schools, hospitals, and municipalities with light-pollution ordinances.

Mini LED Wall Pack Light — 30W

The JC-LGL mini LED wall pack is a compact, low-profile fixture for doorways, side and rear building entrances, walkways, and residential garages. At 30W it produces 3,600 lumens — equivalent output to 200W–300W HPS at 85% less energy. The pre-punched mounting plate mounts to any standard junction box in approximately 60 seconds. ETL listed, IP65 waterproof, and available in two voltage versions: 120V-only or universal 100–277V. Both include a built-in dusk-to-dawn photocell and a 5-year warranty.

LED Wall Pack Light Specifications at a Glance

Where to Use LED Wall Pack Lights

LED wall pack lights are the most common outdoor security fixture for any building that needs automatic nighttime wall-mounted illumination:

• Warehouses and factories — perimeter security lighting and exterior wall coverage for nighttime operations
• Parking lots and garages — wall-mounted fill lighting where pole lights leave dark zones along building edges
• Retail storefronts and shopping centers — bright, professional exterior lighting at entrances and signage walls
• Schools, hospitals, and office buildings — safe, consistent exterior lighting that meets code requirements
• Loading docks and driveways — reliable task lighting for nighttime deliveries and vehicle access
• Residential garages, side doors, and back yards — compact mini wall packs provide security lighting without over-illuminating neighboring properties

How to Choose the Right LED Wall Pack Light

Step 1 — Match wattage to your coverage area

For a single doorway or walkway up to 10 feet wide, the 30W mini wall pack (3,600LM) is sufficient. For driveways, loading docks, and mid-size commercial exteriors (10–25 ft spread), start with the 60W model (7,800LM). For large warehouse perimeters and open commercial parking areas that need maximum coverage, the 120W model (15,600LM) or the 100W full cutoff is the right choice.

Step 2 — Consider your mounting height

Mini wall packs work best at 8–12 ft mounting height. Standard 60W and 120W models are designed for 12–20 ft. Full cutoff models with an adjustable bracket can serve 8–25 ft heights. The higher the mount, the wider the spread — but foot-candle levels at ground drop as height increases, so pair a higher mount with a higher wattage.

Step 3 — Standard or full cutoff?

If neighboring properties, traffic, or local ordinances require no upward light spill, choose the full cutoff LED wall pack. Its 0–90° adjustable bracket lets you aim the beam precisely without moving the fixture. For maximum area coverage with no directional restrictions, the standard forward-throw models are efficient and cost-effective.

Step 4 — Check for utility rebates

All JC-LGL wall pack lights are DLC (DesignLights Consortium) listed, which is the standard qualification requirement for most U.S. utility LED rebate programs. Rebate amounts vary by state and provider. Visit designlights.org to check available incentives before purchasing — rebates can significantly reduce your net cost per fixture.

FAQs About LED Wall Pack Lights

What is a wall pack light used for?

A wall pack light is a hardwired LED fixture mounted on an exterior building wall to illuminate surrounding areas at night — entrances, driveways, parking zones, loading docks, and walkways. It is one of the most widely used outdoor commercial security lighting fixtures because it provides broad coverage directly from the wall surface without requiring a separate pole or post.

Do LED wall pack lights turn on automatically?

Yes. Every JC-LGL wall pack model includes a built-in dusk-to-dawn photocell sensor that switches the fixture on automatically at sunset and off at sunrise. No timer wiring, smart switch, or manual operation is needed.

What is the difference between a standard and full cutoff wall pack?

A standard (forward-throw) wall pack spreads light broadly in front of and below the fixture, including some upward scatter. A full cutoff wall pack channels 100% of its output downward — zero uplight. Full cutoff fixtures are required in dark-sky compliance zones, preferred near residential properties, and help avoid glare-related code violations. JC-LGL's full cutoff series includes a 0–90° adjustable bracket so you can dial in the exact beam angle on-site.

Are JC-LGL wall pack lights waterproof?

Yes. All standard and mini wall pack models are rated IP65 — fully sealed against dust and protected against low-pressure water from any direction, making them suitable for rain, snow, and coastal humidity year-round. The full cutoff series is rated IP66, providing additional protection against high-pressure water jets. All models are UL or ETL listed for wet locations.

What wattage LED wall pack do I need?

For a single doorway or small walkway: 30W (3,600LM). For driveways, side-building coverage, and mid-size commercial exteriors: 60W (7,800LM). For large warehouses, factories, and open parking areas: 120W (15,600LM). Mounting height also matters — higher mounts spread light further but reduce ground-level foot-candle levels, so increase wattage proportionally.

How do I install a wall pack light?

JC-LGL wall pack lights mount to a standard 4-inch or round junction box (J-box) on your exterior wall using the included surface-mount backplate. The 30W mini wall pack attaches directly to the J-box in approximately 60 seconds without removing the lampshade. Larger 60W–120W models follow the same principle. Because wall packs are hardwired fixtures (120V or 100–277V AC), installation must be completed by a licensed electrician in most U.S. jurisdictions. JC-LGL includes installation instructions with every order.

Do LED wall pack lights qualify for utility rebates?

Yes. All JC-LGL LED wall pack lights are DLC listed, which is the primary eligibility requirement for most U.S. utility rebate programs. Savings vary by state and utility provider. Contact your local utility or visit designlights.org to confirm eligibility and calculate potential rebate amounts before your order.

What warranty comes with JC-LGL wall pack lights?

All JC-LGL LED wall pack lights include a 5-year replacement warranty. If a fixture develops a defect within 5 years of purchase, JC-LGL ships a replacement unit — no repair required. Email support@jclgl-led.com with your order number and a photo or video of the issue. Warranty claims are reviewed and responded to within 48 hours.

Need help selecting the right fixture or wattage for your building? Browse related products including outdoor lighting, LED parking lot lights, and LED work lights, or contact the JC-LGL team at support@jclgl-led.com or +1 (715) 440-5721 for a free photometric layout