If you're considering upgrading the outdoor lighting for your shop, JC-LGL Lighting's LED wall lights are definitely worth a try. Perhaps your shop's exterior already features an old light that still works, but is noisy and consumes a lot of power. This old light might have been around for decades, making it time to switch to a more energy-efficient and effective new model.
Choosing the Right Light Fixture
The JC-LGL Lighting LED wall lights is an excellent choice, with a power output of 120 watts and a color temperature of 5000K, providing bright white light that is perfect for outdoor use. Led wall pack lights delivers an impressive brightness of 15,600 lumens, ample to illuminate large areas such as the exterior of your shop. If you also need to improve the lighting over a large outdoor area like this, these LED wall pack lights are highly suitable.
The body of this led wall lights is made from heavy-duty cast aluminum, and it features a glass lens instead of the common plastic ones. This makes it not only more durable but also less likely to discolor or degrade from sun exposure. The installation is also straightforward, and if you have some electrical experience, it can be done quickly. If you have never worked with electrical installations before, we recommend hiring a professional electrician for your safety.
Installation Process
1. Removing the Old Light Fixture and Preparing Tools
First, ensure safety by turning off the power, then proceed to remove the old light fixture. Use a Phillips screwdriver to dismantle the casing and expose the internal wiring, which includes white (neutral), black (power), and copper (ground) wires.
2. Knocking Out Installation Holes
Examine the back of the new led wall pack light fixture and mark the installation holes that match up with the electrical box. Gently tap the marked holes with a hammer and punch until they are completely knocked out, ensuring alignment with the electrical box.
3. Wiring Steps
Follow the standard wiring sequence as per the instruction manual, using wire nuts to ensure each connection is secure. Be particularly cautious, as sometimes the wire colors in your home may be configured differently. Always verify the function of each wire before connecting.
4. Securing the Light Fixture
Tuck the wiring into the electrical box at the back of the led wall pack light, ensuring no wires are exposed. Secure the fixture to the wall with screws, making sure it is firm and does not wobble. After securing the led wall pack light fixture, attach the casing and glass lens using screws, ensuring a good seal.
5. Post-Installation Testing
Turn on the power and test if the led wall lights works properly. The light's photocell sensor should automatically turn off during the day and on at night. Check the waterproofing of the installation, and consider adding an extra layer of sealant around the led wall pack light for enhanced water resistance.
6. Adjustments and Nighttime Effectiveness Testing
At night, the led wall pack light's brightness is exceptional, effectively illuminating the entire exterior of your shop. The photocell sensor is very sensitive and can automatically control the light based on the ambient lighting conditions. The overall effect is highly satisfactory.
Compared to the old fixtures, JC-LGL Lighting's LED wall lights not only provide higher brightness but also boot up instantly, unlike old fixtures that may require a long warm-up time. They operate almost silently and are highly energy-efficient, significantly reducing operational costs. They offer robust illumination and adjust the brightness based on environmental light, ideal for all-day lighting scenarios.
Upgrading to JC-LGL Lighting's LED wall pack lights is a worthwhile investment. They are easy to install, offer exceptional performance, and greatly enhance the exterior lighting of your shop. If you have any questions about this wall light, feel free to leave a comment below, or directly contact JC-LGL's customer service for a prompt response and resolution to your inquiries.