JC-LGL 2FTx4FT LED Flat Panel Lights, 72W 9360 LM, Surface Mount Kit Selectable, Wattage and Color Temperature Adjustable, Dustproof ETL

Replaced our old HID fixtures with these. Far more efficient and brighter.

These lights are great! The diffuser sheet helps distribute the led lights more uniformly

The retail space is now well lit. Clean, bright light that shows off the products.

Well made LED overhead lights. Easy install. Variable lumen and white colors are a plus

Such a great upgrade over flourescent! Arrival ed quickly and damage free.. install is super easy and takes less than 5 minutes once in place in your drop ceiling.. couldn’t be happier, highly recommend these.

Easy to install. I found a YouTube video for these exact LEDs that had some helpful tips. Nice, bright, even lighting.

These LED panels are surprisingly lightweight, which made installation a breeze. The frame feels sturdy enough to handle being placed in ceiling tiles without any worry. I really appreciate the adjustable light settings, especially the wide range of color temperatures. It's great to be able to fine tune the lighting to match the environment. You do have to adjust the settings from the back of the panel, so it's best to do that before you fully install it, but once you've picked your preferred settings, you probably won't need to change it often. The brightness is good, and while I wish it could get just a tad brighter at the highest setting, it's definitely sufficient for our needs. The light is very even, with no hotspots or shadows. I was even thinking about getting more of these to build some DIY photography light boxes. The low energy consumption and minimal heat output are big pluses. Overall, I'm very happy with these panels, especially considering the price and not having to deal with glass tube fluorescent light bulbs

These LED troffers are definitely the ones to grab. They fit directly into the 2x4' drop ceiling grid and wire easily using the hot/neutral/ground wires. (They also work without the ground connected.) They are color-selectable with 5 different temperatures, though I tend to stick with the 4000K if I am doing a fluorescent replacement and 5000K if I want a bit brighter light. I personally don't care for the 6000K, which is too blue, or the warmer colors, which are more suited to a home living space. You can also select the intensity, though my meter showed them to use about 2 more watts than the rating for each of 30/40/50 and 60W settings.. The 72W setting was accurate, though, with my unit taking 71.8W. (It may be just a typo, and perhaps it should be listed as 32/42/53/62/72W instead.) In any event, the flexibility is awesome, as you can adjust to the wattage that makes the most sense, and if you want to give user control to brightness, a 0-10V dimmer connected to the purple/pink wires in the box gives you all the variety you need. Wiring is a bit cramped in the linear box, whereas other panels use a wider, more rectangular wiring box, though perhaps this lower profile is better for some. The back plate comes with 4 pre-cut knockouts in the long dimension for passing the wiring, and a smaller knock-out on the very end (shown in the photo), which can be used for the 0-10V connection if you are wiring that separately (as is recommended). The 4 metal tabs on the back allow for hanging the units to the ceiling grid, if you choose, though these are so light, you likely won't need to do that unless you are in earthquake country.

The lights work great. I put them in a large closet and they provide exceptional light. They do not look industrial so not out of place. You can adjust the color temp so colors in the closet look the same as elsewhere. I wanted Bright. 5 stars because of customer service. I had a problem with one light and they were responsive and got me fixed up quickly. No complaints. They are working fine. 4 or 5 weeks so far

Installed 4 fixtures in a 500 sq. ft. shop with 10-14' ceilings. Installation was straightforward. Build quality is acceptable - not very high quality, but decent enough for a home shop setting. All four lights work out of the package. The range of the light temperature adjustment is great. I liked them best on the 5000K setting for my shop, but this can differ for other applications.
Based solely on installation and initial user experience, I would purchase these again. Long term durability and service life is yet to be determined.

Pretty solid pair of office/shop lights. I've been slowly supplementing my lacking lighting in the shop with LED panels like this just to fill out the dim spots, and so far I've liked these ones the most. A bit pricey for what they are, but the brightness and temperature switches on the top of the units really help to match the lighting color in the shop, because these things go from an almost deep orange to an eye-searing bluish white.The units don't really come with much to help with wiring, but the tops have a removable panel for accessing the wiring and making a break-out for conduit or a wire clamp bulkhead. The options for hanging these seem pretty limited because although I was able to use tiny little hook spots bent into the metal brackets, you can't really get anything in through those little triangular bends bigger than a keyring. These are meant and are more suited for drop-panel ceilings, but you can make it work in a shop or garage without much more fuss than it takes to wire up a light.

Good lights. Really like the option of being able to adjust the temperature and wattage that way if you have existing lights you can match to them. Had to replace one of my old ones when I couldn't source a driver for it. These were perfect. Only issue I had and it's not completely the manufacturer's fault but packaging is inadequate. I bought a two pack and their packaged with the diffusers face to face in the box but nothing to protect the back panel . One of mine the panel was smashed(probably shipping company which wasn't Amazon) and was unsure of the construction of this. Hooked it up and you could see the LEDs because they were close to the diffuser. Only needed to use one so installed the other one which was undamaged. Luckily these are manufactured very simple so about 20 screws I took apart and bent the back panel flat again so now I have a spare. I like that the driver is integrated into to the panel also. I wouldn't hesitate to purchase these again if I need more . But minus one star for the poor packaging.

These babies are bright! A single panel effectively does the job of two or more 4ft dual fluorescents and you can adjust the color temperature. They're easy to wire up and a good size for ceiling installations in panels for drop ceilings. They're light, but seem to be well-constructed. You can manually set the wattage and color temperature with switches on the back of the lights. They aren't the least expensive option out there, but they're high quality, high brightness, and light weight.

These LED panels are surprisingly lightweight, which made installation a breeze. The frame feels sturdy enough to handle being placed in ceiling tiles without any worry. I really appreciate the adjustable light settings, especially the wide range of color temperatures. It's great to be able to fine tune the lighting to match the environment. You do have to adjust the settings from the back of the panel, so it's best to do that before you fully install it, but once you've picked your preferred settings, you probably won't need to change it often. The brightness is good, and while I wish it could get just a tad brighter at the highest setting, it's definitely sufficient for our needs. The light is very even, with no hotspots or shadows. I was even thinking about getting more of these to build some DIY photography light boxes. The low energy consumption and minimal heat output are big pluses. Overall, I'm very happy with these panels, especially considering the price and not having to deal with glass tube fluorescent light bulbs

A fantastic upgrade to my old LED four tube trough lights. I've gone from a yellow tinted light to white . The photo shows the new light on the left and it's set at 50 W and 5000 K. The original light on the right is a diffused light and you can visibly see the color difference. I do not have a dropped ceiling which these are actually meant for, but I was able to use the installed clips to attach them to the ceiling joists and made them recessed to the garage ceiling. This was not an easy install because I had to figure out how to hold them against the ceiling and go up in the attic and attach them. But it all worked out. Also, now I'm able to add insulation over these lights, which I was not able to do with the old set up. As these are brand new and everything is working as it should time will tell whether these are value or not. But it cost about the same to buy the bulbs as it does to buy the entire unit and with this it gives you the flexibility of setting the wattage and the tone of the light. A significant upgrade.

Very nice, lightweight 2x2 light fixture that is easy to wire up, and does not weigh much making it easy for a single person to install.The hooks at the side of the fixture for installing in a 2x2 (or 2x4) standard lay-in ceiling, also have a small loop at the top so light-weight chain can be used to suspend the fixture.I ended up installing the light in an area without a ceiling, and used some s-hooks at each of the corners (and is light enough that supporting it on one side, wiring the electrics in, and then swinging it up into positing and attaching the last two chains was easy).Wiring the light for power has standard 3-wires, and also two optional control wires should you want to add dimming. Keep in mind that if you want to add dimming, you need a switch that puts out a 0-10v signal, else you just get full brightness.The light puts out more light than fluorescent lights I replaced, and is fairly even.Having switches at the top of the light gives easy access to adjust the brightness, and the temperature of the light. If the light fixture lasts for a long time, seems to be a pretty good value for what you get.