JC-LGL High Bay LED Lights 150W-300W CCT Selectable 5000K&5700K UFO HB Series

Super bright - perfect for the workshop or garage! This "UFO" LED appears well constructed out of aluminum for the body. All LEDs work (and I'm still seeing spots from staring into it!!) It is bright. I do not have a lumen meter, but I would guess that it is very close to the advertised 36,000 lumens. If you have an advanced setup in your high-bay area, this light supports dimming via the separate 0-10v dimmer wiring connection. I'm using this in my garage over my woodworking area and WOW!, is this light bright. It makes a huge difference and is a big improvement over the existing 4-foot fluorescent lights. These need a 120-volt power source. In my garage, I am using the ceiling-mounted outlets (shared by the garage door openers) to power them. I am using smart plugs so that I can turn these off remotely via Alexa.

I do quite a bit of work in my garage on various projects. Vehicle maintenance, sanding, painting but it always seems like I could use just a bit more light. I've set up my work light on its stand in the past but this is a more permanent solution. It only took a few minutes to thread an eye bolt into a rafter and run the power cord to an existing ceiling outlet. I used a Smart Plug that works with Alexa to save having to wire in a switch. It now lights up my main workspace to where there's plenty of light for anything that I'm working on. It's super bright yet not harsh and stays very cool even when on for extended periods.

These lights are AWESOME! Super bright. Easy to hang. I would DEFINITELY buy again.

I built a 1,000 ft2 garage and installed (8) of these 100 watt lights. The electrician was skeptical of other lights from previous experience that they don''t put out their rated lumen but we were both surprised how bright the garage is with these lights on. I have 11 ft ceilings and I would say the light level is more like task lighting. Super bright!

These lights are awesome. Replaced 4qty. Metal Halide high bays.

BEST THING ABOUT ITEM: very brightADDITIONAL LIKES: does not emit much heat given brightness, easy to hang, big heat sync, heavy duty construction, 5 year warrantyWORST THING ABOUT ITEM: appearance not aesthetically pleasingADDITIONAL DISLIKES: no built in remote controlCOMMENTS (Function, Appearance, Quality): This is a well built, heavy-duty warehouse or shop LED light. It is easy to mount as it includes a built in aluminum hook from which to suspend it. The hook as a set screw you can use to close the hook to prevent it from detaching. It also contains a 2 ft safety cable in case the hook fails or is circumvented. It comes with a 5 foot long cord with a 3 pronged plug. It also has a short pair of wires to which a switch/dimmer could be attached.Though it is designed for high bay usage, I have it hung 11 feet off the floor above the lathe in my shop. I was concerned it might put out a little too much heat that close to the work area, but thermal measurements revealed there was very little change in temperature at my height. I've enclosed three images of my wireless thermometer readings. The first is of the ceiling area with the light off (64.3), the second is of the light itself while on after 1 hour and pointed directly at the source (94.8) and the third pointed at the ceiling right next to the illuminated light also at the 1 hour mark (64.9 - image shows the memorized reading after measurement was taken since I was holding it straight up from the spindle to take the reading). The work area remains quite comfortable and is very well lit. I have it plugged into a remote controlled outlet to toggle it on/off from the work area.Naming it after s UFO is fitting as that is how it appears with its well segmented high aluminum heat sink. It has a nice sturdy feel to it as a result. A switch that is protected by a silicone plug allows you to chose between 150/200/240 watts thereby adjusting power consumption and light brightness. The light is incredibly bright at all settings, but I have it on high. The company doesn't provide any coverage estimates, but I estimate if mounted at ~10 feet, it will easily light a double garage.MOST SUITABLE FOR: anyone wanting bright focused lightIS IT WORTH IT?: Considering the performance of the light and the warranty, probably. The ~$90 cost seems a bit steep, but you get an incredibly illuminated area for a prolonged period for that price.*PRECISE RATING: 5 (the five year warranty helped soften the blow of the price, so no deduction there)RECOMMENDATION: I can highly recommend the 240W light mounted at least 9 feet of the floor to brightly illuminate any work area.(As always, I will report back if there are any durability issues with additional use.)*Rating scale:5 = exceptional in several characteristics, happy to have it, definitely buy again;4 = excelling in at least one characteristic, would probably buy again;3 = average overall, would consider buying again;2 = low end merchandise and/or service, but somewhat useful, not sorry, but would not buy again1 = not worth the time or money; sorry I bought itCharacteristics considered: Presentation/Packaging, Quality, Craftsmanship, Materials, Functionality, Utility/Versatility, Instructions, Ease-of-Use, Comfort, Value.

Wow... It is seriously bright in the garage thanks to this light. It was so bright, I had to get a comparison with my previous shop light configuration. In the picture the difference is amazing. The light meter is mounted at 5 ft above the floor and 5 ft from the lights attached to the truss bottoms. The existing lighting is provided by 12 shop lights 4ft 40w LED tube lights rated at 4400 lumens (each). The light reading for this configuration is 434lx or 18250 lumens. The existing lights were turned off and the 240W LED UFO High Bay Light was fired up by itself. The output was stunning with a reading of 5.51klx (5510lx) or 231050 lumens. The lumens are calculated because my light meter is only certified to lux.Bottom line, the light is very well constructed with appropriate safety devices to prevent a mount failure. The heat sink seems to work very well. This light is going to be moved to the 20 ft ceiling in the barn, the light output reading would be closer to the rated output per the manufacture. This will be a great addition to help light up a difficult area. As far as value, this light is worth it. This would be great in the garage with the optional dimmer. It is legitimately too bright for a 1600 square foot area with a 10 foot ceiling without the ability to dim it.Just a quick note: I use and often rely on reviews before purchasing products. Regardless of whether a product is purchased or received as part of a promotion, my personal reviews are unbiased. They are based and developed from product usage; observed performance and whenever possible technical testing. My goal is to provide readers with trustworthy and useful product reviews.

This is the cat's meow of UFO lighting. It has all the bells and whistles on it. Switchable from 150watt, 200 watt or the monster 240watt power up. Of course the higher the wattage the brighter the light gets. Ultra energy efficient design saves you big time on your electric bill. These UFO lights come close to negating Anne Roberts Jacques Turgot's law of diminishing returns. At a 240 watt input this light puts out 36,000lm at a temperature of 5000K. Very comfortable temperature for the human eye. Made of die cast aluminum, the frame easily dissipates heat very well. These UFO lights operate at a temperature far below that of a halogen light making them much safer to use in fire prone areas like a barn. You can hang them from a wire just about anywhere in 2 minutes. Plugs in to traditional 3 prong outlet using a 5 foot long cord that has been installed and waterproofed. Wired to be dimmable when put on a dimmer switch (not provided). IP65 rating gives them immunity to any weather on this planet. I highly recommend this product.

I got some lights made almost exactly like this a few months back, and they have held up great.. Those were mounted at an angle to direct light at about a 45 degree angle instead of straight down.. This light is made just like those, so I see no reason why I would have any different of an experience with this one vs those ones that I got before..The light does get a bit warm, so you will definitely need ventilation around it.. I had it running for about 30 seconds to 1 minute, and the LED part was already getting pretty warm.. As long as their is plenty of ventilation, it will not get hot enough to burn.. I just wanted to tell you that it did get pretty warm in that area after just about 1 minute so you know, it does generate a bit of heat..It is advertised as 200 watts.. As you can see, mine only used 192 watts after running for a couple of minutes.. 8 watts is a little off, but nothing to complain about.. and definitely not enough to drop a star off of it either..Overall, it is working good.. I have no real complaints with it.. The only main flaw I found so far was it was just slightly under power, but not by much..

This model is the 240/200/150W light, and WOW! I am blown away by the amount of light that is coming out of this beast. Even at 150W, the amount of light is more than sufficient for most tasks. In the photos, the light is hung at about 13' above the floor and the first photo is 240W, second at 200W and third at the 150W (the first photo shows darker shadows due to the phone camera struggling with the extreme contrast). The wattage is easily switched at the unit and if you don't want to climb a ladder to change it, as they mention, a dimmer can be installed when it is wired directly to your electrical system.. There's also an adjustment dial which you see in the manufacturer video to the left of the wattage switch, and nothing explains what that is for. I didn't need to touch it, however; the unit was plug and play.For me, working in an unfinished house with no interior electrical panel yet, this thing is a godsend. I am spending about 200 dollars a month on electricity right now, and a lot of that is in worklights. The LED worklight bulbs I have purchased promise brightness but don't deliver. Oh and did I mention that I just blew a 20A GFCI outlet by overloading it? That was yesterday. This unit is going to pay for itself within 6 months.

This light is incredibly bright! It does have three levels of brightness that are stored, even when the power is removed. They are helpful if you are not mounting this very high up in your environment. I have this mounted over a workbench that had no light, and it was important to see Clearly what was happening. This light allows a great pattern and no shadows to be cast when I am underneath it. I am very pleased with how easy it was to assemble and the length of the extension cord.It does come with a safety wire, but it's not clear how that should be mounted. I attached it using the screw from the body And I assume that is OK. It's hanging 2 feet over my workbench, so I'm not very concerned about it falling and I am not in a earthquake prone area.Thankfully it has not gotten hot or produced any noise so I would buy this again, especially if I needed something to be hung higher up such as a barn area.

If you want the most light ever, this is the light for your shop. I have tested other lights, but this one seems to be the top of the performance level. I took a picture of my dirty shop floor with the shadow from the light output around the car. I have one of my old 220W fluorescent lights directly above the opposite side of the car and it is way outperforming that unit with new bulbs! I cannot wait to get the old fixtures down and install all the new LEDs.The LED is set to 240W and appears quite nice with a white finish and aluminum heat sink. It is spaced about 5" away from the hook so the heat will not likely affect what it is hanging from. The hook that hangs the light is beefy and easily allows you to hang the light on a 1/2" conduit. It has a plug in for a standard 110V outlet with an appropriate length cord. There is also a 10V dimmable option for this light, but I plan to use it full brightness as I build transmissions and this will allow me to see in tight areas without a flashlight.The price is at the top for the excellent output and features it provides, but you will not be disappointed.

I installed this in my 20' by 40' shop to replace some fluorescent lamps. This lamp is much brighter and illuminates the area much better, but I think it would take three to illuminate the whole shop. Most of my shop I don't need bright light so this is used on the end where I do most of my work.It is made of metal that makes it feel very sturdy and it should dissipate heat very well with the large metal content. There are three brightness adjustments and mine is set on high. It's almost too bright so I'll consider lowering it to the next lower brightness. Mine is only mounted about 13' high and it's sometimes it shines in your eyes. I think this would work better with a higher ceiling, maybe 20' or more. It has connections for a dimmer but I'm not using that feature. There is a switch to select the three brightness settings.The photo shows the light mounted in my shop. I will hard-wire it later by mounting an outlet near the lamp. Since my shop has a wood frame, I just screwed in a washer wood screw with a fender washer and it hooked over that. Mounting it took all of five minutes, including getting the ladder up there.I'll update the review if anything happens, but so far I'm very pleased with this light.

This is a high-bay light consisting of several rings of COB LEDs, each underneath a small lens on the face of the light.The light is mounted using a round aluminum eyelet that screws into the top of the light, and is secured in place with a set screw. For security, there is a secondary steel cable mounted to the light that can be looped around a beam or fixture and clipped in place.Mounting the light was relatively simple. Testing it before mounting, I was somewhat disappointed with how bright the light appeared. However, once I mounted it in place, the amount of light it put out was quite astounding. Perhaps that has something to do with the lenses on the LEDs? The brightness is not really apparent until it's actually mounted in the roof and shining down. It puts a fairly wide splash of light downwards, very usable.The light is constructed of aluminum with integral heat sinks, and while it does get quite warm, it's not anywhere near as hot as an incandescent or vapor light.There are a second set of low voltage wires which can be used to control or dim the light. I left them unconnected. There is also a setting you can access to adjust the light level - I left it set at "HIGH".Who is this for?- Anyone who needs to light up a large warehouse or industrial room.Pros:- Easy to install- Puts out a ton of lightCons:- Security cable is overlong